Wrong or Missing PIN for PSE

If you getting an error like “Wrong or Missing PIN for PSE” in your DEV_WEBDISP log file after starting the SAP Web Dispatcher configuration then you can use the following solution…

Example situation ;

Wrong or Missing PIN for PSE

Let’s try to solve it with following commands.

We are going to RESET PIN of our PSE files.

Wrong or Missing PIN for PSE

We assume that our old PINs are 1 and 2 for the related PSE files.

Execute the commands ;

Wrong or Missing PIN for PSE

No try to start “SAP Web Dispatcher” and check the DEV_WEBDISP log file

Wrong or Missing PIN for PSE

I hope this helps you to solve your problem…

 

 

3 Responses to "Wrong or Missing PIN for PSE"

  1. Manoj says:

    Hello,

    I am facing same issue as stated above but after resetting PIN as well, getting same error.

    Could you please help me to resolve.

    Regards,
    Manoj

  2. sapbasisinfo says:

    Hello Manoj ,

    Are you sure you can reset the PIN correctly ? You should use your PIN instead of number “1″ or “2″ which shown in the picture (after the switch “-x”).Can you open the PSE file using the command “sapgenpse get_my_name \….PSE” ?

    Regards.
    Fatih

  3. Shahin says:

    Hi Fatih,
    this solution solved my problem with missing PIN. And now I’m getting error like below:

    [Thr 2860] =================================================
    [Thr 2860] = SSL Initialization platform tag=(ntamd64-msc14)
    [Thr 2860] = (720_REL,Feb 8 2015,mt,ascii,SAP_UC/size_t/void* = 8/64/64)
    [Thr 2860] profile param “ssl/ssl_lib” = “C:\sapweb\sapcrypto.dll”
    [Thr 2860] resulting Filename = “C:\sapweb\sapcrypto.dll”
    [Thr 2860] = found CommonCryptoLib (SAPCRYPTOLIB) Version 8.4.33 pl40 (Jan 15 2015) MT-safe
    [Thr 2860] = current UserID: NT AUTHORITY\SYSTEM
    [Thr 2860] = using SECUDIR=C:\sapweb\sec
    [Thr 2860] profile param “ssl/server_pse” = “C:\sapweb\sec\SAPSSLS.pse”
    [Thr 2860] resulting Filename = “C:\sapweb\sec\SAPSSLS.pse”
    [Thr 2860] = secudessl_Create_SSL_CTX(): PSE “C:\sapweb\sec\SAPSSLC.pse” not found,
    [Thr 2860] = using PSE “C:\sapweb\sec\SAPSSLS.pse” as fallback
    [Thr 2860] = secudessl_Create_SSL_CTX(): PSE “C:\sapweb\sec\SAPSSLA.pse” not found,
    [Thr 2860] = using PSE “C:\sapweb\sec\SAPSSLS.pse” as fallback
    [Thr 2860] ******** Warning ********
    [Thr 2860] *** No SSL-client PSE “SAPSSLC.pse” available
    [Thr 2860] *** — this might limit SSL-client side connectivity
    [Thr 2860] ********
    [Thr 2860] = Success — SapCryptoLib SSL ready!
    [Thr 2860] =================================================

    “No SSL-client PSE “SAPSSLC.pse” available”
    I’m not able to connect with https. My profile parameter is :

    # SAP Web Dispatcher Ports
    icm/server_port_0 = PROT=HTTP, PORT=8080, TIMEOUT=900
    icm/server_port_1 = PROT=HTTPS, PORT=8443, TIMEOUT=900
    icm/HTTPS/verify_client = 0

    and files in sec dir are:
    – cred_v2
    – RootCA
    – sapsecu.dll
    – SALSSLS.pse
    – SAPSSLS.cer
    – ticket

    Also, I did not find any information about SAPSSLC.pse and SAPSSLA.pse in offical documentation.

    I’ve used termination ssl in configuration.

    Regards,
    Shahin

Leave a Reply


8 × = eight

Blogroll