Author Archive

SXPG_COMMAND_EXECUTE failed Reason : program_start_error

SXPG_COMMAND_EXECUTE failed Reason : program_start_error
November 19, 2019 | No Comments »

Your SAP system’s DB13 backup actions can be finished with the error message “SXPG_COMMAND_EXECUTE failed Reason : program_start_error”, in this case, we need to check “Back-End Configuration” like show in this post.

rfc/callback_security_method before Release 7.40

rfc/callback_security_method before Release 7.40
November 14, 2019 | No Comments »

As of Basis Release 7.40, SAP offers a standard solution for saving RFC callback calls using positive lists. But if you are using lower version than Release 7.40 then you need to do manual steps to configure “rfc/callback_security_method” on your SAP system.

rfc/callback_security_method

rfc/callback_security_method
November 06, 2019 | No Comments »

RFC callback is a mechanism the called server can initiate to the calling client during synchronous RFC calls. The opened RFC connection to the RFC client is used and it doesn’t require another user logon.

User password invalid for identified /RFC/

User password invalid for identified /RFC/
October 28, 2019 | No Comments »

You may receive an error “User password invalid for identified /RFC/<RFC defination>” while restoring the source system connection via tcode RSA1 after a system refresh operation.

Dump DYN_CALL_METH_CLASS_ NOT_FOUND when starting WebDynPro

Dump DYN_CALL_METH_CLASS_ NOT_FOUND when starting WebDynPro
October 16, 2019 | No Comments »

If you are getting a short dump “DYN_CALL_METH_CLASS_ NOT_FOUND” and “500 Internal Server Error” in IE page while trying to open WebDynPro web pages like in the below case, then you can try the following easiest steps to solve the issue…

Password was not used for a long period message on HANA

Password was not used for a long period message on HANA
October 10, 2019 | No Comments »

If you are getting trouble while trying to log on a SAP system with the message “Password was not used for a long period and therefore deactivated” on a HANA database system, then you can solve it easily with the following SQL statement.

HANA Backup Status Check via SQL

HANA Backup Status Check via SQL
October 04, 2019 | 1 Comment »

When you are getting an error while taking the HANA backup, you can check the backup status via SQL to ensure backup is still running or not with the following SQL statement.

SOAMANAGER Can’t Connect Securely to This Page

SOAMANAGER Can't Connect Securely to This Page
September 26, 2019 | No Comments »

If SOAMANAGER tcode opens the web page with the “Can’t Connect Securely to This Page” message, instead of the “SOA Management” web page, then you should check the related server adress or the port number first.

Database error: TemSe->XRTAB(4)->64 for table TST01

Database error: TemSe->XRTAB(4)->64 for table TST01
September 20, 2019 | No Comments »

You can get the error message “Database error: TemSe->XRTAB(4)->64 for table TST01″ in transaction SM21 like shown in the below picture, then you can solve the issue with the following solution…

Support Package Stack (SPS4) Upgrade on HANA 2.0 Server

Support Package Stack (SPS4) Upgrade on HANA 2.0 Server
September 06, 2019 | No Comments »

This post will show you how can you upgrade your HANA database from HANA 2.0 SPS3 to HANA 2.0 SPS4, so you can easily implement the same steps on your HANA system to upgrade from any SP level to any SP level.

HANA Hardware Check Tool Landscape Script Error : EvalOs is Not Registered

HANA Hardware Check Tool Landscape Script Error : EvalOs is Not Registered
August 02, 2019 | No Comments »

You may get an error message like “EvalOs is not registered” after when you try to check you HANA system with “HANA Hardware Check Tool” for “Landscape Check”, in this case solution is very simple…

PDF Preview “Can’t connect securely to this page”

PDF Preview "Can't connect securely to this page"
July 18, 2019 | No Comments »

When you are getting an error “Can’t connect securely to this page” while triying to open your documents via “PDF Preview” selection, then you can check the following option to solve it…

Adding SYSTEMDB database via DBACOCKPIT for DB13 Actions

Adding SYSTEMDB database via DBACOCKPIT for DB13 Actions
July 09, 2019 | No Comments »

If you want to manage your HANA SystemDB backup operations via DB13, then you can use the following steps to configure easily…

DBVERIFY Result : DBV-00600 Fatal Error

DBVERIFY Result : DBV-00600 Fatal Error
June 26, 2019 | No Comments »

You can get the error “DBV-00600: Fatal Error” while DBVERIFY operation, in this case you can try the below steps to eliminate the situation.

Dump MESSAGE_TYPE_X While Client Copy Operation

Dump MESSAGE_TYPE_X While Client Copy Operation
June 20, 2019 | No Comments »

You can get the error dump “MESSAGE_TYPE_X” while starting the client copy operation on SAP system, in this case you can check the solution in this article…

Inconsistency in SOAMANAGER after a System Refresh

Inconsistency in SOAMANAGER after a System Refresh
June 12, 2019 | No Comments »

You can receiving an error stating “There are severe inconsistencies in the Web Service configuration” when you try to access t-code SOAMANAGER after a system refresh operation.

Logon Error : Select one of the installed languages

Logon Error : Select one of the installed languages
June 06, 2019 | No Comments »

If you get an error message “select one of the languages” while trying to logon SAP system with specific language, then you should check the related language key with the program RSCPINST.

No System Found in Another Group for Import Queue SID

No System Found in Another Group for Import Queue SID
May 29, 2019 | No Comments »

If you get the error message “No System Found in Another Group for Import Queue SID” while trying to import a transport of request in STMS tcode, then you can use the below solution to get rid of the error…

SAP Host Agent error: Unable to open sumjava_connectivity with Permission Denied message

SAP Host Agent error: Unable to open sumjava_connectivity with Permission Denied message
May 21, 2019 | No Comments »

When you try to start SUM Java page, “HTTP 404 Not Found” page comes with “Unable to open connection file …… Permission Error” log message in the host agent sapstartsrv.log file.

Error: Backint exited with exit code 2 instead of 0. console output: No additional Information was received

Error: Backint exited with exit code 2 instead of 0. console output: No additional Information was received
May 15, 2019 | No Comments »

While using “backint” for backup on HANA database, backup process is cancelling with the error message “Error: Backint exited with exit code 2 instead of 0. console output: No additional Information was received”

Find out inactive RFC Definitions in SM59

Find out inactive RFC Definitions in SM59
May 07, 2019 | No Comments »

If you want to find out which RFC definations are not using under SM59 transaction for your SAP system, then you can use the “Check Internal Connection” option of the transaction SM59

HCM Renewal 2.0 post Upgrade activity from HR-CEE Add-on Dumps for SAPLHRPL MP000800

HCM Renewal 2.0 post Upgrade activity from HR-CEE Add-on Dumps for SAPLHRPL MP000800
May 01, 2019 | No Comments »

After upgrading HCM Renewal Add-on, system may get some “SYNTAX_ERROR” dumps for some programs like “SAPLHRPL”,”MP000800″ etc…In this case we can use the following program to delete content of INCLUDEs MPxxxx00_ADDON, H99PLOG_ADDON_HEADER etc.

Import of HANA Delivery Unit Activation Error

Import of HANA Delivery Unit Activation Error
April 17, 2019 | No Comments »

You can get the “Import of HANA Delivery Unit Activation” error while SPAM / SAINT or SUM operations on your HANA system, in this case you can check the below steps to solve the issue…

Blogroll